Kontron NSC2U IP Network Server Instrukcja Użytkownika Pobierz pdf (Strona 39)

Kontron IP Network Server NSC2U

December 2009 Product Guide, rev. 1.4

Server Component Installations and Upgrades—NSC2U Server

Note: The server board supports single DIMM mode operation. Kontron will only validate and

support this configuration with a single 512 MB x8 FB-DIMM installed in DIMM slot A1.

3.4.2.5 Non-mirrored Mode Memory Upgrades

The minimum memory upgrade increment is two DIMMs per branch. The DIMMs must

cover the same slot position on both channels. DIMM pairs must be identical with

respect to size, speed, and organization. DIMMs that cover adjacent slot positions do

not need to be identical.

When adding two DIMMs to the configuration shown in Figure 21, the DIMMs should be

populated in DIMM slots C1 and D1 as shown in Figure 22. Populated DIMM slots are

shown in grey.

Figure 21. Recommended Minimum Two DIMM Memory Configuration

Figure 22. Recommended Four DIMM Configuration

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 151 152

Brak uwag

Kontron NSC2U IP Network Server Instrukcja Użytkownika Strona 39