Kontron pITX-E38 Instrukcja Użytkownika Pobierz pdf (Strona 31)

KTD-N0904-D Page 29 IO-Area Connectors

pITX-E38 Users Guide

SBC-GPIO Connector (SBC-GPIO) 7.8

The SBC-GPIO connector is present on the SBC and used to interface the Battery Module. The two

connectors SBC-GPIO and SBC-Ext-Bat is positioned so that they fit a single 2x6 pin header connector on

the Battery Module.

SBC-External battery (SBC-Ext-Bat) 7.9

The two connectors SBC-GPIO and SBC-Ext-Bat is positioned so that they fit a single 2x6 pin header

connector on the Battery Module.

Pin 1 is Bat+, (same as pin 1 on the SBC connector on the Battery Module)

Pin 2 is Bat-, (same as pin 2 on the SBC connector on the Battery Module)

Note that Intel specifies that battery must be connected, however it is unspecified what is the risk of not

using battery. When battery is not connected, Kontron has not been able to find any problems except for

RTC not running.

Clear CMOS (CLR-CMOS) 7.10

Connect jumper to clear CMOS settings. Don’t leave the jumper installed.

CMOS1

Description

pin1-2

pin2-3

Default position

Load Default BIOS Settings exclusive erasing Password

No function.

Battery

Module

Pull

U/D

Ioh/Iol Type Signal PIN Signal Type Ioh/Iol

Pull

U/D

Battery

Module

SBC-12

PWR

3.3V

GPIO0

IOT

TBD

SBC-11

SBC-10

TBD

IOT

GPIO1

GPIO2

IOT

TBD

SBC-9

SBC-8

TBD

IOT

GPIO3

GPIO4

IOT

TBD

SBC-7

SBC-6

TBD

IOT

GPIO5

GPIO6

IOT

TBD

SBC-5

SBC-4

TBD

IOT

GPIO7

GND

PWR

SBC-3

Signal Description

3.3V

GPIO0..7

General Purpose Inputs / Output. These Signals may be controlled or monitored through

the use of the KT-API-V2 (Application Programming Interface).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 60 61

Komentarze do niniejszej Instrukcji

Brak uwag

Kontron pITX-E38 Instrukcja Użytkownika Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Kontron pITX-E38