Kontron COMe-mSP1 Instrukcja Użytkownika Pobierz pdf (Strona 43)

COMe-mSP1 / Features and Interfaces

4.16 USB

The USB interface comes with three USB controllers (6 USB ports). The USB configuration of the COMe-mSP1 module is

described in the following table:

COM Express Port SCH US15W Port Description

USB0 USB0 USB 2.0 compliant

USB1 USB1 USB 2.0 compliant

USB2 USB4 USB 2.0 compliant

USB3 USB5 USB 2.0 compliant

USB4 USB6 Not USB 2.0 compliant, no UHCI controller (no USB 1.1 / USB 2.0 only)

USB5 USB7 Not USB 2.0 compliant, no UHCI controller (no USB 1.1 / USB 2.0 only)

USB6 USB3 USB 2.0 compliant

USB7 USB2 USB Client or USB 2.0 compliant port (configurable in BIOS Setup)

Internal USB mapping from US15W SCH

USB Client Port

The USB interface supports also one USB client port (USB port 7) that can be activated in setup. If the client function is

disabled in the BIOS this port acts as a normal USB 2.0 port. Please be aware that USB power lines may not be connected

on the USB client port.

Special USB client and host driver software is needed for USB client function. When this

driver and software is installed the client port appears as a mass storage device and NDIS

Network device or as NDIS Network device only in the device manager of the operating

system. Please refer to the Kontron COMe-mSP1 download page for the driver

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 96 97

Brak uwag

Kontron COMe-mSP1 Instrukcja Użytkownika Strona 43