Kontron KBox C-101 Instrukcja Użytkownika Pobierz pdf (Strona 25)

7. System Overview KBox C-101 – User’s Guide (Version 2.00)

7.3.10. Status and General Purpose LEDs

After power is applied and the KBox C-101 performs the boot procedure the LEDs show the POST code. In case of a boot

failure within the uEFI the last post code is displayed. When the boot phase is passed without errors, the LEDs change to

their status and general purpose function.

The following table provides information concerning these LEDs (

Fig. 10 and Fig. 16).

Status and General Purpose LEDs

Designator Function Color Description

THERM Thermal Red blinking

The system turns off due to

over temperature

DRIVE Drives (SSD/HDD) Green SSD/HDD active

SD SD Card Green SD card active

WD Watchdog Red blinking Watchdog timeout occurred

GP1 General Purpose 1

Red/Green/Orange

User general purpose 1

GP2 General Purpose 2

Red/Green/Orange

User general purpose 2

GP3 General Purpose 3

Red/Green/Orange

User general purpose 3

GP4 General Purpose 4

Red/Green/Orange

User general purpose 4

Fig. 16: Detail - Status and General Purpose LEDs

7.3.11. X205 - Optional FIELDBUS Interface

The optional interface (FIELDBUS) on the front side of the KBox C-101 must

be ordered separately. To add a FIELDBUS interface to the KBox C-101 the

second mPCIe slot, on the bottom of the baseboard, will be used. This

connection can be implemented at factory only.

Fig. 17: X205 - Optional FIELDBUS interface

7.3.12. PCIe Expansion Slots 1 and 2

The KBox C-101 provides two PCIe x4 slots for half-length PCIe add-on cards. The two PCIe x4 expansions utilize a subset

of the connections from the processor chipset PEG port. To access these slots (

Fig. 10, PCIe 1 and PCIe 2) in order to

install or remove PCIe x4 expansion cards you have to remove the top side access cover. For better accessibility of the

expansion slots you should to remove the right side access cover (

Fig. 24 and Fig. 22, pos 1 and 3) also.

For installation/removing of the mSATA SSD refer to the subsection

10.2.3, “Installing an mSATA SSD”.

1 PCIe 1 slot

2 PCIe 2 slot

Fig. 18: PCIe 1 and PCIe 2 slots

www.kontron.com 23

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 70 71

Komentarze do niniejszej Instrukcji

Brak uwag

Kontron KBox C-101 Instrukcja Użytkownika Strona 25

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Kontron KBox C-101