Kontron COMe-bP5020 Instrukcja Użytkownika Pobierz pdf (Strona 57)

www.kontron.com

User Guide

COMe-bP5020

6.5.3 Examples of sconf Command Usage

6.5.3.1 sconf select

To change the setting, invoke the “sconf select” command.

Example:

6.5.3.2 sconf set

The setting of the chosen base configuration can be changed via the “sconf set” command. If the “sconf set” command is in-

voked without parameters, all changeable options are shown. In the following example, first, all possible settings are shown,

and then the SDHC routing is changed from onboard to external.

After each “sconf select” or “sconf set” a system powercycle must be performed.

=> sconf select 2

New base configuration 2

=> sconf set

Board's Port Configuration for base config 3 (serdes protocoll 0x15):

Option/Setting | Value # command option <and value>

---------------+--------+------------------------------------

PCIe1 : @5.0G # sconf set pcie1 <@5.0G | @2.5G | off>

PCIe2 : @5.0G # sconf set pcie2 <@5.0G | @2.5G | off>

Aurora : off # sconf set aurora <off | @5.0G | @2.5G>

XAUI : on # sconf set xaui <on | off>

SATA1 : on # sconf set sata1 <on | off>

SATA2 : on # sconf set sata2 <on | off>

USB : host # sconf set usb <host | dev>

UART : 4wire # sconf set uart <4wire | 2wire>

SDHC : onb # sconf set sdhc <onb | ext>

GPIOA : gpio # sconf set gpioa <gpio | lbus>

GPIOB : gpio # sconf set gpiob <gpio | lbus>

GPIOC : gpio # sconf set gpioc <gpio | lbus>

=> sconf set sdhc ext

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 70 71

Brak uwag

Kontron COMe-bP5020 Instrukcja Użytkownika Strona 57