Kontron AM4101 Instrukcja Użytkownika Strona 27

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 30
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 26
AM4101 Introduction
ID 1022-5406, Rev. 1.0 Page 1 - 11
P R E L I M I N A R Y
LEDs
Module Management
LEDs
LED1 (red): Out-of-Service LED
LED2 (red/green/amber): Health LED
HS LED (blue): The hot swap indicator provides basic feed-
back to the user on the hot swap state of the
module. The HS LED states are off, short
blink, long blink, and on.
User-Specific LEDs
ULED3 (red/green): AMC Ethernet port A link signal status or
POST code LED
ULED2 (red/green): AMC Ethernet port B link signal status or
POST code LED
ULED1 (red/green): Freely configurable or POST code LED
ULED0 (red/green): Freely configurable or POST code LED
Timer
Watchdog Timer Software-configurable, two-stage Watchdog with programmable timeout
ranging from 125 ms to 256 s in 12 steps
Serves for generating IRQ, hardware reset or both in cascaded mode
System Timer
Two groups of four global 32-bit timers clocked with MPX clock or RTC
clock input
Timers within each group can be joined to time longer durations
Hardware delay timer for short reliable delay times
IPMI
Module Management
Controller
Renesas H8 microcontroller with 40 kB RAM and redundant 512 kB
MMC Firmware Flash with automatic roll-back strategy
The MMC carries out IPMI commands such as monitoring several on-
board temperature conditions, board voltages and the power supply sta-
tus, and managing hot swap operations.
The MMC is accessible via a local IPMB (IPMB-L) and Keyboard Style
Interfaces (KCS).
Hot Swap The AM4101 has full hot swap capability.
Thermal Management CPU and board overtemperature protection is provided by:
Four temperature sensors for monitoring the board temperature
CPU internal sensors
Specially designed heat sinks
General
Power Consumption For further information, refer to Chapter 5, “Power Considerations”.
Temperature Range Operational: -5°C to +55°C
Storage: -40°C to +70°C
Mechanical Single Module:
Mid-size version
Full-size version
Dimensions Mid-size: 181.5 mm x 73.5 mm x 18.96 mm
Full-size: 181.5 mm x 73.5 mm x 28.95 mm
Board Weight Mid-size: 261 grams (with heat sink)
Full-size: 304 grams (with heat sink)
JTAG Two JTAG interfaces:
One processor JTAG interface routed to the onboard debug connector
for debugging purposes
One onboard JTAG interface connected to the AMC Card-edge connec-
tor for debugging and manufacturing purposes
Table 1-2: AM4101 Main Specifications (Continued)
AM4101 SPECIFICATIONS
Przeglądanie stron 26
1 2 ... 22 23 24 25 26 27 28 29 30

Komentarze do niniejszej Instrukcji

Brak uwag